• Fuel Filter Heater Wrap 100W 12V - Small
  • Fuel Filter Heater Wrap 100W 12V - Small
  • Heater Wrap
    • Fuel Filter Heater Wrap 100W 12V - Small
    • Fuel Filter Heater Wrap 100W 12V - Small
    • Heater Wrap
    SKU: W1038

    Fuel Filter Heater Wrap 100W 12V - Small

    In Stock
    $61.15
    Shipping calculated at checkout.

    Ready to ship

    View Full Details
    • Fuel Filter Heater Wrap 100W 12V - Small
    • Fuel Filter Heater Wrap 100W 12V - Small
    • Heater Wrap
    1 / 1
    Press & drag to view

    Keep your fuel flowing in extreme cold with this smaller wrap. It warms canister fuel filters at the point where they are most likely to clog, and it is sized for a wide range of stock filters while drawing less power than our large wrap.

    Key Features

    • Comes with one heated filter wrap rated 100W at 12VDC. Uses 14 gauge wire and draws 8.3A.
    • Works with Donaldson Filters and with Mercedes, VW and other stock fuel filters. Surface temperature can reach 300F or higher. Use only on metal filters.
    • Fits filters with a diameter from 3 to 4 inches and a circumference from 9.5 to 12.5 inches. Heating area measures 3 inches high by 9.5 inches long.
    • Made from heavy duty heating material manufactured in the US by Arlon Silicone Technologies Division.

    Specifications

    • Power: 100W
    • Voltage: 12VDC
    • Wire gauge: 14 gauge
    • Current draw: 8.3A
    • Fits diameter: 3 to 4 inches
    • Fits circumference: 9.5 to 12.5 inches
    • Heating area: 3 by 9.5 inches
    Product Specifications
    Volts 12V
    Gauge Wires 14
    Draws 8.3A
    • 5 stars: 4 (67%)
    • 4 stars: 2 (33%)
    • 3 stars: 0 (0%)
    • 2 stars: 0 (0%)
    • 1 star: 0 (0%)
    A
    Anonymous

    Wrapped my filters and switch then on for 10 min during sub-zero weather. Tractor hasn't had any lack of power even using summer blend.

    P
    Patrick W.

    This is a very good product

    Getting the order processed and shipped could be faster, but ...

    this is a very good product. I would highly recommend it to others.

    T
    Troy W.

    Works great...!!

    E
    Ezra G.

    Worked very good

    D
    Don B.

    Pretty good. Wrap could have been about 2-3 inches longer or at least the velcro for my application, (98' 5.9 Cummins). I came up with a in-line fuse, (10amp) and a toggle switch. Write back in the Spring when my testing is complete. Thanks

    J
    Jason D

    good heater

    bought it to heat my IP, It can be very cold here & if hot wvo gets in a IP the pump can seize from the hot parts in the pump "growing" fast than the pump case. Very bad day, colder walk!!

    Related Products

    You may also like

    Recently viewed

    Last seen items