Skip to Product Info
    • Goldstream 4 GPM Portable Oil Transfer Pump with 3-Position Switch - 3/4hp, 120/220V 60HZ
    SKU: W2115

    Goldstream 4 GPM Portable Oil Transfer Pump with 3-Position Switch - 3/4hp, 120/220V 60HZ

    In Stock
    Regular Price $1,015.99
    Shipping calculated at checkout.

    Only 4 left

    The Goldstream 4 GPM Portable Oil Transfer Pump with 3-Position Switch is built for heavy viscosity fluids that other pumps struggle with, and reverses flow with the flip of a switch. Motor oil, gear oil, vegetable oil, and B100 biodiesel all move reliably at 4 GPM with no pressure regulator to cause problems.

    This unit pairs the GSM8 cast-iron pumphead with a custom US-Made Baldor motor running at 1725 RPM. The lower motor speed is what makes this configuration effective for heavy oils. It produces four times the torque of a 3450 RPM motor, which means the pump moves thick fluids without stalling or overheating. The pumphead relies on the fluid itself for internal gear lubrication, so it is well suited to continuous duty oil transfer applications.

    The GSM8 Pumphead

    The GSM8 is a direct-drive, cast-iron positive displacement gear pumphead. It is self-priming, runs without a pressure regulator, and uses Viton seals for compatibility with high-viscosity and high-temperature fluids. Ports are 1/2" NPT with 1/2" stainless steel hose barbs. Not suitable for water.

    The Motor

    A custom US-Made Baldor 3/4HP motor running at 1725 RPM drives the GSM8 to produce 4 GPM. It comes with a 3-position (forward / off / reverse) switch installed at the factory, a 2.5 ft power cord, and thermal overload protection. Wired for 120V out of the box, rewirable for 220V.

    Reversible Flow

    The factory-installed 3-position switch lets you change flow direction with a simple flip, with no rewiring. Useful for drum filling, tank transfers, and recirculation applications.

    Specifications

    • SKU: W2115
    • Pumphead: GSM8 Cast-Iron Positive Displacement Gear Pump
    • Motor Speed: 1725 RPM
    • Flow Rate: 4 GPM (15 liters per minute)
    • Self-Priming: Yes
    • Suction Height: 15 ft
    • Push Lift Height: 90 ft
    • Port Size: 1/2" NPT Inlet / Outlet
    • Hose Barbs: 1/2" Stainless Steel
    • Seals: Viton (high-temp)
    • Temperature Rating: 210°F
    • Duty Cycle: Continuous
    • Motor: 3/4 HP, 120/220V 60Hz (ships wired for 120V)
    • Switch: 3-Position Forward / Off / Reverse, factory installed
    • Fluid Compatibility: Motor oil, gear oil, vegetable oil, B100 biodiesel. Not for water.
    • Reversible: Yes (3-position switch included)
    • Overall Dimensions: 17" x 11" x 7"
    • Weight: 53 lbs

    What's in the Box

    • GSM8 Cast-Iron Gear Pumphead
    • US-Made Baldor Motor (3/4 HP, 1725 RPM) with 3-Position Switch Installed
    • Three-piece shaft coupler with rubber element
    • Two (2) 1/2" NPT to 1/2" Stainless Steel Hose Barbs

    Note: Hoses and wands are sold separately. This pump requires oil for internal gear lubrication and will not operate with water.

    Product Specifications
    Specification Name Specification Value
    Flow Rate 4 GPM
    Horsepower 3/4 HP
    Voltage 120/230V 60hz
    Port Size 1/2" NPT Inlet / Outlet
    Self-Priming Yes
    Reversible 3-Position Switch Installed
    Documents
    34N656Y166G1 Download

    Recently viewed

    Last seen items