Skip to Product Info
    • Extreme Raw Power Centrifuge - 6000 RPM 120/230V
    • Extreme Raw Power Centrifuge - 6000 RPM 120/230V
    • Metallic stand with circular platform and mechanical components on a white background
    • Stainless steel bowl on a white background
    • Extreme Raw Power Centrifuge - 6000 RPM 120/230V
    • Mechanical component on a white background
    • Extreme Raw Power Centrifuge - 6000 RPM 120/230V
    • Centrifuge flow schematic
    SKU: RPC103

    Extreme Raw Power Centrifuge - 6000 RPM 120/230V

    In Stock
    Regular Price $2,337.17
    Shipping calculated at checkout.
    Voltage: 230

    Only 4 left

    Extreme Raw Power Centrifuge

    The Extreme Raw Power Centrifuge separates dirt, sludge, and water from waste oil using a bowl spinning at 6000 RPM. Roughly 3600 g of centrifugal force provides close to three times the force of the standard Raw Power model.

    Key Features

    • No disposable filter media to buy or replace.
    • Gravity fed operation without a pressurized feed system.
    • High quality aluminum castings and a custom Baldor motor rated for continuous use.
    • Processes waste vegetable oil, motor oil, ATF, hydraulic oil, and other fluids.
    • Smooth running motor with a sound comparable to a large fan.
    • Responsive service and warranty support from WVO Designs.

    How It Works

    Oil enters the spinning bowl, where dirt, sludge, and water that are heavier than the oil collect against the bowl wall. Cleaned oil flows out continuously in a single pass through the machine.

    Specifications

    • Speed: 6000 RPM
    • Centrifugal force: roughly 3600 g
    • Flow rate: 5 to 25 gallons per hour, or approximately 19 to 76 liters per hour
    • Power: Extreme controller supplied for 120V and 230V customers
    • Overall height: 18 inches
    • Overall diameter: 18 inches
    • Hose fittings: 3/4 inch hose barb
    • Temperature rating: up to 400°F
    • Duty: continuous use
    • Feed: gravity fed, single pass, continuous flow
    • Fluids: water, diesel, waste vegetable oil, motor oil, biodiesel, ATF, gear oil, and more
    • Shipping package: one box, approximately 50 pounds

    Documents

    Resources

    30 Day Money Back Guarantee

    Run the centrifuge on your own oil. If it does not prove itself in your shop, send it back within 30 days for your money back.

    Read customer experiences in the review section below.

    Product Specifications
    Specification Name Specification Value
    Flow Rate 5-25 Gallon/Hour (19-95 Liters/Hour)
    Hose Fittings 3/4" Hose Barb
    Rated Up to 400°F
    Documents
    Assembly Manual Download
    • 5 stars: 12 (92%)
    • 4 stars: 0 (0%)
    • 3 stars: 1 (8%)
    • 2 stars: 0 (0%)
    • 1 star: 0 (0%)
    j
    jeff green

    I still have not installed my centrifuge but I am very happy with the quality of the machine and I look forward to using it soon!

    A
    Anonymous

    works GREAT like it's suppose to

    J
    Jay Joseph

    Hose from heater to top of lid should be replaced with a different style. Oil weeps out of the silicone hose that was provided. Otherwise, great product.

    J
    Jamal K.

    We are happy and satisfied with the centrifuge. It arrived complete with everything.

    Assembly was minor and went smooth.

    We are a tyre pyrolysis company. For 18 months, we are struggling to clean our oil. We managed to do all kind of test runs. The last 20 days it is running for 14 hours per day. We have already centrifuged 4000 liters (twice). It is clean. Even after filtering with 1 micron filters, we were able to centrifuge greasy stuff out.

    We are very much satisfied. We are contemplating to buy 3 more to install to centrifuge oil for our commercial deliveries. Kind regards

    J
    John B.

    my centrifuge is awesome

    And my centrifuge is awesome and even better after adding the power booster. The machine work on that is incredible and it helps a lot.

    A
    Alan V.

    Works Great!

    The centrifuge works great.

    R
    Ronald W.

    You did do a pretty decent job

    "I have to say I was not very pleased overall. A number of parts were missing, and the ABB drive was the incorrect part as well. You did do a

    pretty decent job in terms of correcting the deficiencies."

    R
    Ruben K.

    Works Perfect for us.

    "Good Day! Everything is Good!!!

    Works Perfect for us.

    Thank You!"

    D
    David B.

    It is a great machine !!!

    "It's good stuff. I am happy with both items. In truth, I have not yet installed the heating element as I will need to pull in some #10 wire to handle the amperage for the 220V circuit. I am not the best at knowing which wires go where in these things so I will probably need to contact the manufacturer and find out where each colored wire goes but I'm sure it will work once I get that sorted out.

    I process right around 1000 gallons of oil per year. That's how much oil my source produces each year and it has been very consistent for nearly 9 years now. The centrifuge is great. We've been using it for about 5 years now and although it is no longer clean and shiny, it still does the job perfectly. It is a great machine and a ""must-have"" item in my biodiesel processing operation."

    P
    Patrick

    Great for large quantities of algae

    Our lab researching algal biofuels recently purchased this centrifuge, and we have been very happy with the results. We have observed about 90% separation efficiency at a fairly fast flow rate of 1 L/min and up to 96% at slower flow rates. This seems to be as good or better than results from much more expensive centrifuges.

    A
    Audun Jaavall

    A really nice machine

    After recieving the RPC Extreme the assembly went smoothly. Instruction videos and the written manual made it a lot easier. Cleaning 1 barrel of waste motor oil was fun and easy, thanks for delivering an awesome piece of work.

    Greetings from Norway.

    D
    David

    Clean Oil, Hot

    Item was received promptly but with some minor damage from shipping (not your fault). Replacement temperature adjuster knob received from Jason Jelonek. System functioning properly...finished product is very clean and rate is good too. Heater works very well - loads of heat.

    Thanks again for all your help

    David, AB Canada

    m
    musbrad

    Expensive and worth every penny

    Does not need filters. In-line heater is wonderful! Could not be happier. Time to get rid of dieselcraft centrifuge. Well worth the bucks!

    Recently viewed

    Last seen items