1. Sooo Nice Review by Jody Morgan

   Overall Rating

   Soooo nice not having to use filter bags, I will send pics latter of my setup. Hope it helps someone else with the head-banging and wasted money. (Posted on 1/29/10)

2. Money Saver Review by Alex

   Overall Rating

   This is a great product and a money saver (less filters to replace + dewatering)
   So far had a set of motor bearings replaced due to a shaft seal ring leak.
   Could be better to have a mechanical seal in my opinion. (Posted on 1/12/10)

3. For Biodiesel Review by Tom Hamlin

   Overall Rating

   First few batches with the 6ooo RPM Motor appears to be doing a better job de-watering , Titration numbers seem to be lower as well which will save us $$$ on KOH (Posted on 1/5/10)

4. Good Machine Review by MonsterHauling

   Overall Rating

   Good machine...with a few upgrades could be the best!!!!!!!!!!! (Posted on 5/27/09)

5. Very Well Designed Review by Vern

   Overall Rating

   Product is well designed, very few revisions needed.
   Inline heater assembly in OUR tests revealed insufficient heat capability for 5000 RPM centrifuge operating at 20 GPH and 165F. Max temp capable was 140F. Vibration issue was very minimal considering rotor speed. Controller for VFD motor was simple, versitile, and definately the right choice.
   No problems with workmanship whatsoever. Well packaged for shipping and both units arrived in good condition. Customer service is excellent, with the manufacturer standing behind any concern. Correspondence is also excellent with concise information returned promptly. (Posted on 5/26/09)

6. Location Review by John Schlesinger

   Overall Rating

   Well built, clean looking, went together easily and after talking over the controller with Leon it fired off great. Would do it again. Thanks (Posted on 5/26/09)

7. Very Good Quality Review by Turnerbiodiesel.com

   Overall Rating

   Very good quality. We will be buying another one. (Posted on 5/26/09)

8. Denmark Review by Henrik Olsen

   Overall Rating

   There were a few issues on the proto type,but nothing serius. Has been corrected with great service from WVO.
   
   I trimmed the centrifuge bowl a bit, cause it was a bit off center. Nothing serius but my centrifuge is spinning 5000 rpm so better safe than sorry.
   
   The lid and seal are simple and well working, The finish and size is above my expectations for a prototype. All parts included plus a few extras.
   
   A good product and great service. I can recommend it to others. (Posted on 5/26/09)

You're reviewing: Extreme Raw Power Centrifuge